The h-SbxWO3+2x Oxygen Excess Antimony Tungsten Bronze

We describe the previously unreported oxygen excess hexagonal antimony tungsten bronze with composition Sb_0.5W₃O₁₀, in the following denoted as h-Sb_xWO_3+2x with x=0.167, to demonstrate its analogy to classical A_xWO₃ tungsten bronzes. This compound forms in a relatively narrow temperature range between 580 °C<T<620 °C. It was obtained as a dark-blue polycrystalline powder, and as thin, needle-shaped, blue single crystals. h-Sb_xWO_3+2x crystallizes in the hexagonal space group P6/mmm with the cell parameters a=7.4369(4) Å and c=3.7800(2) Å. The antimony and excess oxygen occupy the hexagonal channels within the network of corner-sharing WO₆ octahedra. h-Sb_xWO_3+2x has a resistivity of ρ_{300 K}≈1.28 mΩ cm at room temperature, with little if any temperature-dependence on cooling. DFT calculations on a simplified model for this compound find a metallic-like electronic structure with the Fermi level falling within rather flat bands, especially around the Γ point.     

Selective Excitation of Band Extrema in Valley Photonic Crystals

Flexible control of building blocks of photonic crystals enables achieving desirable band structures. Exploration of photonic band extrema has brought many fantastic features to design artificial optical materials, such as Brillouin‐zone‐corner extrema for valley photonic materials and zone‐center extremum for zero‐index metamaterials. However, two such kinds of extrema are always found independently in different photonic crystals. In this work, a kind of valley photonic crystals possessing both zone‐center and zone‐corner band extrema almost at the same frequency is proposed. Inspired by antennas theory, a three‐antenna array (TAA) source is devoted to individually manipulate each extremum. The correlation coefficient is given to determine the coupling efficiency between the TAA source and extrema eigenmodes. By using a source with a high correlation coefficient, these extrema bulk states are selectively excited consistent with their eigenfields. Furthermore, three control cases are shown that multiple extrema points are simultaneously excited, in order to confirm the validity of the correlation coefficient. Finally, a potential application of a beam‐steering device is proposed through selective excitation of ternary extrema. This work develops binary valley states into ternary mix states, rendering more degrees of freedom for on‐chip optical information transport, particularly for beam steering and mode division multiplexing.     

Size effect of lead-free halide double perovskite on luminescence property

Lead-free halide double perovskites have gathered wide scientific interest since they are environmentally friendly and stable.However,compared to the lead perovskites,their optoelectronic properties are compromised.Herein we report a series of bulk lead-free mixed Bi-In halide double perovskites:Cs_2AgBi_(1-x)In_xCl_6(0x1).The Cs_2AgBi_(0.125)In_(0.875)Cl_6breaks the parity-forbidden transition and retains direct band gap structure,having warm-white light emission,with photoluminescence quantum efficiency(PLQE)of 70.3%,much higher than the PLQE of reported lead perovskite materials.Its exciton self-trapping dynamics is investigated.Meanwhile,the Cs_2AgBi_(0.125)In_(0.875)Cl_6nanocrystals and Cs_2AgBi_(0.125)In_(0.875)Cl_6microcrystals can be synthesized by modified hot injection and rapid cooling crystallization,respectively.The size effect of Cs_2AgBi_(0.125)In_(0.875)Cl_6is studied on the photoluminescence(PL)property.Additionally,the bulk material exhibits excellent stability on exposure to light,humidity and air for more than 3 months.It is a promising candidate as highly efficient warm white-light emitting material for road lighting.     

Copper-Catalyzed Trifunctionalization of Alkynes: Rapid Formation of Oxindoles Bearing Geminal Diboronates

A copper-catalyzed trifunctionalization of alkynes that provides rapid access to oxindoles bearing a geminal diboronate side chain, highlighted by the simultaneous formation of one C−C bond and two C−B bonds, is reported. This new reaction features simple reaction conditions (ligand-free catalysis), a general substrate scope, and excellent chemoselectivity. Mechanistic study revealed a reaction sequence constituted by, in the order, borylation, intramolecular cross-coupling, hydroboration, which has been rarely documented.     

Loading rate and confining pressure effect on dilatancy,acoustic emission,and failure characteristics of fissured rock with two pre-existing flaws

Investigating the dilatancy, acoustic emission and failure characteristics of fissured rock are significant to ensure their geotechnical stability. In this paper, the uniaxial and triaxial compression experiments with AE monitoring under different loading rates were carried out on fissured rock specimens with the same geometrical distribution of two pre-existing flaws. The dilatancy and AE activity of these specimens were discussed, and the effects of the confining pressure and loading rate on the mechanical parameters and failure characteristics were analyzed. The results show that the exponential strength criterion is more suitable than the Mohr–Coulomb strength criterion to characterize the strength characteristics of fissured rock. The crack evolution and failure characteristics of fissured rock specimens are more complicated than those of intact rock specimens. The failure characteristics of the fissured rock follow the tensile shear coalescence model, crack branching occurs with increasing the loading rate, and the multi-section coalescence model is verified with increasing the confining pressure. The phenomena of stress drop and yield platform usually occur after the dilatancy onset, the specimen does not fail instantaneously, and the propagation and coalescence of cracks cause a sharp increase in the AE signals, circumferential strain, and volumetric strain.     

Efficient Syntheses of Traumatic Lactone and Rhizobialide

Herein, we report the total synthesis of traumatic lactone and rhizobialide by utilizing allenoic acid to construct the lactone ring. The key starting materials, allenoic acids, could be prepared by the ATA (allenation of terminal alkynes) of a terminal alkyne with an aldehyde that contained a protected hydroxyl group followed by hydrolysis. Importantly, the asymmetric synthesis could be realized just by replacing racemic diphenylprinol with (R)- or (S)-diphenylprinol to deliver the optically active allenoate.     

Construction of Cyclobutanes by Multicomponent Cascade Reactions in Homogeneous Solution through Visible-Light Catalysis

[2+2] Photocycloaddition of two olefins is a general method to assemble the core scaffold, cyclobutane, found in numerous bioactive molecules. A new approach to synthesize cyclobutanes through multicomponent cascade reactions by merging aldol reaction and Witting reaction with visible-light-induced [2+2] cycloaddition is reported. An array of cyclobutanes with high selectivity has been achieved from commercially available aldehydes, ketones (or phosphorus ylide), and olefins with visible-light irradiation of a catalytic amount of (fac-tris(2-phenylpyridinato-C₂,N)iridium) ([Ir(ppy)₃]) at room temperature. Control experiments and spectroscopic studies revealed that the triplet–triplet energy transfer from the excited [Ir(ppy)₃]* to enones, generated in situ from aldehyde and ketone or aldehyde and phosphorus ylide, is responsible for these simple and efficient muticomponent transformations.     

Self-Healable Polyelectrolytes with Mechanical Enhancement for Flexible and Durable Supercapacitors

The practical application of advanced personalized electronics is inseparable from flexible, durable, and even self-healable energy storage devices. However, the mechanical and self-healing performance of supercapacitors is still limited at present. Herein, highly transparent, stretchable, and self-healable poly(2-acrylamido-2-methyl-1-propanesulfonic acid) (PAMPSA)/poly(vinyl alcohol) (PVA)/LiCl polyelectrolytes were facilely prepared by one-step radical polymerization. The cooperation of PAMPSA and PVA significantly increased the mechanical and self-healing capacity of the polyelectrolyte, which exhibited superior stretchability of 938 %, stress of 112.68 kPa, good electrical performance (ionic conductivity up to 20.6 mS cm⁻¹), and high healing efficiency of 92.68 % after 24 h. After assembly with polypyrrole-coated single-walled carbon nanotubes, the resulting as-prepared supercapacitor had excellent electrochemical properties with high areal capacitance of 297 mF cm⁻² at 0.5 mA cm⁻² and good rate capability (218 mF cm⁻² at 5 mA cm⁻²). Besides, after cutting in two the supercapacitor recovered 99.2 % of its original specific capacitance after healing for 24 h at room temperature. The results also showed negligible change in the interior contact resistance of the supercapacitor after ten cutting/healing cycles. The present work provides a possible solution for the development of smart and durable energy storage devices with low cost for next-generation intelligent electronics.     

Synthesis,characterization, and electrochemistry of monophosphine‐containing diiron propane‐1,2‐dithiolate complexes related to the active site of [FeFe]‐hydrogenases

Five monophosphine‐substituted diiron propane‐1,2‐dithiolate complexes as the active site models of [FeFe]‐hydrogenases have been synthesized and characterized. Reactions of complex [Fe₂(CO)₆{μ‐SCH₂CH(CH₃)S}] ( 1 ) with a monophosphine ligand tris(4‐methylphenyl)phosphine, diphenyl‐2‐pyridylphosphine, tris(4‐chlorophenyl)phosphine, triphenylphosphine, or tris(4‐fluorophenyl)phosphine in the presence of the oxidative agent Me₃NO·2H₂O gave the monophosphine‐substituted diiron complexes [Fe₂(CO)₅(L){μ‐SCH₂CH(CH₃)S}] [L = P(4‐C₆H₄CH₃)₃, 2 ; Ph₂P(2‐C₅H₄N), 3 ; P(4‐C₆H₄Cl)₃, 4 ; PPh₃, 5 ; P(4‐C₆H₄F)₃, 6 ] in 81%–94% yields. Complexes 2 – 6 have been characterized by elemental analysis, spectroscopy, and X‐ray crystallography. In addition, electrochemical studies revealed that these complexes can catalyze the reduction of protons to H₂ in the presence of HOAc.